Roller Marks - Stipple

Interior Paint Solution

 
 

Roller Marks - Stipple: Unintentional textured pattern left in the paint by the roller.

Possible Causes:

Use of incorrect roller cover.

Use of lower grades of paint.

Use of low quality roller.

Use of incorrect rolling technique.

Solution:

Use the proper roller cover; avoid too long a nap for the paint and the substrate. Use quality rollers to ensure adequate film thickness and uniformity. High quality paints tend to roll on more evenly due to their higher solids content and leveling properties. Pre-dampen roller covers used with latex paint; shake out excess water. Don't let paint build up at roller ends. Begin rolling at a corner near the ceiling and work down the wall in three-foot square sections. Spread the paint in a zigzag "M" or "W" pattern, beginning with an upward stroke to minimize spatter; then, without lifting the roller from the surface fill in the zigzag pattern with even, parallel strokes.

 

Interior Paint Problems

 

Exterior Paint Problems

Blistering

Burnishing

Blocking

Caulk Failures

Cracking - Flaking

Foaming - Cratering

Lapping

Mud Cracking

Mildew

Picture Framing

Poor Scrub Resistance

Poor Sheen Uniformity

Poor Stain Resistance

Poor Flow - Leveling

Poor Hiding

Roller Marks - Stipple

Roller Spattering

Sagging

Surfactant Leaching

Wrinkling

Yellowing

 

Alligatoring
Blistering

Chalk Run down
Chalking
Cracking Flaking

Dirt Pickup
Efflorescence - Mottling
Fading-Poor Color Retention
Frosting

Lapping

Mildew

Nailhead Rusting

Paint Incompatibility

Peeling
Poor Galvanized Metal Adhesion
Poor Alkali Resistance
Poor Gloss Retention

Surfactant Leaching

Tannin Staining

Vinyl Siding Warp

Wax Bleed

Wrinkling

 

 

 

 
 
 
 
 

| Site Map | Add Link Resources | Privacy Policy © 2016 PainterClick.com All Rights Reserved.